Choosing The Quiet Drive Options - HP Evo D510 SFF Hardware Reference Manual

✎

Choosing the Quiet Drive Options

✎
Hardware Reference Guide
I
In Post Messages Disabled mode: When the Compaq logo screen
displays, press any key to exit the logo screen. Immediately after
exiting the logo screen, press
utility.
A menu displays with the following options:
I
Configure/View Host Adapter Settings
❏
SCSI Bus Interface Definitions
N
Host Adapter SCSI ID
N
SCSI Parity Checking
N
Host Adapter SCSI Termination
❏
Additional Options
N
Boot Device Options
N
SCSI Device Configuration
N
Advanced Configuration Options
I
SCSI Disk Utilities
Lists all SCSI devices and SCSI ID numbers
For additional information about configuring POST message
display status, refer to the Computer Setup (F10) Utility Guide on the
Compaq Documentation Library CD.
The Quiet Drive is an optional feature and may or may not be
included on your computer (UATA drives only).
If this computer is equipped with a Quiet Drive or, if you choose to
install a Quiet Drive, you may configure the drive to operate in Quiet
mode or Performance mode (default). When idle, the Quiet Drive
produces an acoustic noise level approximately 4 decibels (dB) lower
than that of a standard drive. When configured to operate in Quiet
mode, the Quiet Drive reads and writes data at an acoustic noise level
approximately 7 dB lower than that of a standard drive.
Hard Drive Installation Guidelines
to access the SCSISelect
Ctrl+A
B–7