Working With The Multibay - HP Evo D510 SFF Hardware Reference Manual

Hardware Upgrades
Ä

Working with the MultiBay

Ä
2–24
7. Remove the bezel blank from the front bezel, if necessary.
8. Replace the computer cover.
9. The system will automatically recognize the drive and
reconfigure the computer.
CAUTION: When servicing the computer, ensure that cables are placed
in their proper locations during the reassembly process. Improper cable
placement can damage the computer.
The MultiBay is pre-installed in some models of the Small Form
Factor computer. It is a special drive bay that supports a variety of
optional 12.7-mm removable drives, including:
I
MultiBay 24X Max Optical Drive
I
MultiBay 8X Optical Drive with RAM read
I
MultiBay Optical Drive
I
MultiBay SMART Hard Drive
CAUTION: To prevent loss of work and damage to the computer or a drive:
I
If you are inserting or removing a hard drive, exit all software
applications, shut down the operating system software, and turn off
the computer. Do not remove a hard drive while the computer is on
or in standby mode.
I
Before handling a drive, ensure that you are discharged of static
electricity. While handling a drive, avoid touching the connector.
I
Before traveling with, shipping, storing, or removing a drive other
than a hard drive, make sure that no media, such as a CD-ROM or
DVD-ROM, is in the drive and that the media tray is closed.
I
Handle a drive carefully; do not drop it.
I
Do not use excessive force when inserting a drive.
I
Avoid exposing a hard drive to liquids, temperature extremes, or
products that have magnetic fields such as monitors or speakers.
I
If a drive must be mailed, place the drive in a bubble-pack mailer or
other suitable protective packaging and label the package "Fragile:
Handle with Care."
Hardware Reference Guide