THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
Programming Additional Transmitters
Refer to SENTRY KEY "Customer Key Programming."
NOTE: If you do not have a programmed transmitter,
2
contact your authorized dealer for assistance.
Battery Replacement
The recommended replacement battery is CR2032 bat-
tery.
NOTE: Do not touch the battery terminals that are on
the back housing or the printed circuit board.
1. With the transmitter buttons facing down, use a small
Separating Transmitter Halves
screwdriver or similar flat object to pry the two halves of
the transmitter apart. Make sure not to damage the
rubber gasket during removal.