E.6
CONNECTORS
The ATI RAGE IIC graphics card contains two connectors: the monitor (display) connector for
attaching a CRT display and a multimedia connector for attaching multimedia peripherals such a
TV or other video cards.
E.6.2 MONITOR CONNECTOR
There are two connector types associated with the graphics subsystem; the display monitor
connector and the graphics memory expansion connectors.
Figure E–4. VGA Monitor Connector, (Female DB-15, as viewed from rear).
Table E–6. DB-15 Monitor Connector Pinout
Pin
Signal
1
R
2
G
3
B
4
Mon ID
5
GND
6
R GND
7
G GND
8
B GND
NOTES:
[1] RS343A signal levels:
[2] TTL signal levels:
[3] TTL signal levels:
[4] Fuse automatically resets when excessive load is removed.
9
Table E-6.
DB-15 Monitor Connector Pinout
Description
Red Analog [1]
Blue Analog [1]
Green Analog [1]
Monitor Identification
Ground
Red Analog Ground
Blue Analog Ground
Green Analog Ground
Full on condition = 0.700 VDC
Rise Fall Time @ max pixel rate = 4 ns
Output impedance = 75 ohms
Max Rise Time = 100 ns
Max Fall Time = 15 ns
Max Rise Time = 15 ns
Max Fall Time = 10 ns
Original - March 1998
Technical Reference Guide
Pin
Signal
9
+5 VDC
10
GND
11
Mon. ID
12
SDA
13
HSync
14
VSync
15
SCL
--
--
Compaq Personal Computers
Description
+5 volts (fused) [4]
Ground
Monitor Identification
DDC2-B Data [2]
Horizontal Sync [3]
Vertical Sync [3]
DDC2-B Clock [2]
--
E-7