Mechanical Design - Compaq Deskpro Workstation AP230 Technical Reference Manual

Chapter 2 System Overview
2.3

MECHANICAL DESIGN

These systems are available in three form factors:
Small Form Factor (SFF) – a small-footprint desktop designed for environments where both
performance and space are critical issues.
Slim Desktop (SDT) – a low-profile ATX-type desktop that satisfies expandability needs.
Configurable Minitower (CMT) – an ATX-type unit providing the most expandability and
being adaptable to desktop or floor-standing placement.
The following subsections describe the mechanical (physical) aspects of the Compaq Deskpro
models.
CAUTION: Voltages are present within the system unit whenever the unit is plugged
into a live AC outlet, regardless of the "Power On" condition. Always disconnect the
!
power cable from the power outlet and/or from the system unit before handling the
system unit in any way.
NOTE: The following information is intended primarily for identification purposes
only. Before servicing these systems refer to the applicable Maintenance And
Service Guide. Service personnel should review training materials also available on
these products.
2-4 Compaq Deskpro Personal Computers
Third Edition – April 2001