Chassis Layouts - Compaq Deskpro Workstation AP230 Technical Reference Manual

2.3.2 CHASSIS LAYOUTS

This section describes the internal layouts of the chassis. For detailed information on servicing the
chassis refer to the multimedia training CD-ROM and/or the maintenance and service guide for
these systems.
The chassis layout for the Small Form Factor is shown in Figure 2-4. Service features include:
Easily-removable card cage assembly.
Tilting drive bay assembly (for easy access to processor and memory sockets).
Slot 3
Slot 2
Slot 1
Card Cage
Assembly
System Board
Upper Drive Bays
(Tilting Assembly)
NOTE:
[1] Installed on systems with integrated AC97 audio.
Figure 2–4. Small Form Factor Chassis Layout, Top View
PCI Conn. 3
PCI Conn. 2
PCI Conn. 1
Slots On Backplane,
Rear View
Third Edition - April 2001
Technical Reference Guide
Back
Front
Compaq Deskpro Personal Computers
Smart Cover Lock
Solenoid
Power Supply
Speaker Assembly [1]
Lower Drive Bay
2-7