Converting To Self-Closing Door - RAIS attika VISIO UNIQ Installation Manual

Convert to self-closing door before building in the insert.
Convert the door to self-closure by removing some of the door's counterweights.
There are counterweights on both sides.
25 - EN
1. Remove the transport safety fittings and retainer screws
for the counterweight cover
Transport safety fitting.
2. Remove the counterweight cover by pulling it up.
Counterweight cover.
3. Loosen the locking ring (2.5 mm hex key). Remove the
number of counterweights that allow the door to close
slowly and at a constant speed. Double-check the func-
tion.
Counterweights
Locking ring
4. Tighten the locking ring (2.5 mm hex key)
Locking ring
5. Attach the counterweight cover and the retainer
screw(s).
Counterweight cover.