Table of Contents
Advertisement
INSTALLATION
CHOICE OF MATERIAL FOR INSTALLATION
The material can be panels/brick with an insulation value greater than 0.03 m² x K/W.
The insulation is defined as wall thickness (in metres) divided by the wall's Lambda val-
ue.
Consult your installation technician/chimney inspector.
During testing, the fireplace insert is installed in a cabinet made of non-flammable
50 mm calcium silicate panels (Skamotec 225).
The stove comes with a flue collar that is 200 mm in diameter.
The flue collar can be changed from a top outlet to a rear outlet.
Loosen the clamping strap on the outlet flange and adjust as preferred.
The fireplace insert must be placed on heat-resistant material.
See the following pages for installation dimensions and placement distances.
13 - EN
Advertisement
Table of Contents
