Diskonchip? Address Setting; Bios Type Selection - Boser HS-5210 Manual

2.11 DiskOnChip? Address Setting

The HS-5210/5020 provides a U9 socket for install the DiskOnChip?
module.
A JP7 may select the starting memory address of the DiskOnChip?
(D.O.C.) for avoid the mapping area with any other memory devices. If you
have another extra memory devices in the system with the same memory,
neither the HS-5210/5020 nor the extra memory devices will function
normally. Please setting both at different memory address mapping.
JP7 : DiskOnChip? Address
??
PIN NO.
*) : default setting
The D.O.C. function allows the system in using without FDD nor HDD. The
D.O.C. may formatting as driver C: or driver A:. User may also easily uses
the DOS's commands such as FORMAT, SYS, COPY, XCOPY,
DISCOPY and DISKCOMP etc. This is means that the D.O.C. may uses
as driver-A if the system without FDD-A for ambient application. Please
contact with your supplier for different size D.O.C. module.

2.12 BIOS Type Selection

The HS-5210/5020 provides a JP5 for selects the type of flash chip in using
as the BIOS. The manufacturer provides 29C010 on the board.
JP5 : BIOS Type Selection
??
PIN NO.
*) : default setting
18
*1-2
3-4
1-2
*2-3
Address
D000
D800
Address
29C010
28F010