Table of Contents
Advertisement
Using your machine
IMPORTANT: Always make sure the machine is switched off and the safety button on the trigger handle
is LOCKED before connecting/disconnecting the lance, nozzle or accessories.
Using your accessories
The jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture,
decking and boats.
To attach the jet nozzle.
Hold down the release button on the
Fit the lance with a firm
lance, push the jet nozzle and lance
push and twist to lock
firmly together until you hear an
into place.
audible CLICK. Release the button and
gently pull the jet nozzle to make sure it
is locked securely before use.
The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry.
As it is not fitted with a pressure regulator it is not suitable for use on delicate or painted surfaces.
To attach the turbo
Hold down the release button on the
nozzle, fit the lance with
lance, push the turbo nozzle and lance
a firm push and twist to
firmly together until you hear an audible
lock into place.
CLICK. Release the button and gently pull
the turbo nozzle to make sure it is locked
secure before use.
Squeeze the trigger on the trigger handle to release
a high pressured water jet, and start cleaning.
Squeeze the trigger on the
trigger handle to release a
high pressured water jet, and
start cleaning.
IMPORTANT: When using solution make sure you follow the dilution instructions and use Vax solution only.
Solution can only be used with the trigger handle, lance and solution nozzle, or car/outdoor/rotary brush
if supplied. Solution CANNOT be used with the jet and turbo nozzles.
Using solution with your pressure washer
Unhook the solution tube and
Switch the machine on and
insert into the solution bag.
squeeze trigger to dispense the
Solution only dispensed with
water and solution mix.
the trigger handle, lance and
solution nozzle, or car/outdoor
/rotary brush if supplied.
Using your machine
After use rinse the pressure
washer to prevent blockages.
Inset the solution tube into a
bucket of fresh water (Max
40 � C), turn the machine on and
squeeze the trigger for 1 minute.
Advertisement
Table of Contents
