Table of Contents
Advertisement
Problem
It takes too long to cook the
dishes or they cook too quickly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The appliance makes noises.
The display shows "12.00".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
WARNING!
Refer to Safety chapters.
Technical data
Dimensions
Height
Width
Depth
Top oven capacity
Main oven capacity
www.zanussi.com
Possible cause
The temperature is too low or too
high.
You left the dish in the oven for
too long.
There was a power cut.
We recommend that you write the data here:
894 - 912 mm
550 mm
600 mm
34 l
79 l
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
Reset the clock.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the minimal distances of fitting check the
table.
Remedy
21
Advertisement
Table of Contents
