Rotating The Monitor - BenQ BL2420 User Manual

Rotating the monitor

1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
To have the
Auto Pivot
please install the
Display Pilot
>
Display Auto Pivot
monitor. Select
ON
Alternatively, right-click the desktop and select
in
Portrait Orientation
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as
illustrated.
To avoid the edge of the LCD display hitting the monitor base
surface while it is being rotated, do tilt and extend the monitor
to the highest position before you start to rotate the display. You
should also make sure there are no obstacles around the monitor
and there is enough room for cables.
function that sets the display to rotate with the monitor automatically,
software from
and check
Enable
.
, and apply the setting.
www.benq.com
. And then go to
Display
Screen resolution
or CD. To enable, go to
and
Auto Pivot
from the popup menu. Select
How to assemble your monitor hardware
on your
90
23