Changing The Programme; Interrupting Or Ending The Programme; End Of The Programme; After Washing - Siemens XQG62-WS10K1601W Instruction Manual And Installation Instructions

Operating the appliance
en
Do not leave door open for
■
a prolonged period – water could
run out of the laundry.

Changing the programme

if you have mistakenly started a wrong
programme.
Select
1.
Select another programme.
2.
If required, adjust the presetting
and/or select other functions.
Select
3.
The new programme starts from
the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
Select
1.
Cool down washing: select Rinse
2.
Select
3.
For programmes at low temperature:
Select
1.
Select Spin.
2.
Select
3.

End of the programme

Start/Reload indicate light goes out and
End or - - - - (if - - - - was selected,
without drain) appears on the display
field, buzzer sounds. Set volume of
buzzer ~ Page 21
If - - - - was selected, - - - - is displayed
after the programme ends, touch
I (Start/Pause) button.
Notes
The programme continues by
■
pumping out the water and spinning
the washing (the standard spin
speed can be changed beforehand).
14
I (Start/Pause).
I (Start/Pause).
I (Start/Pause).
I (Start/Pause).
I (Start/Pause).
I (Start/Pause).
If only the water is to be pumped out,
■
press the
Pause) button again before the
spinning starts. The programme is
interrupted and the door lock is
released. The washing can be
removed.

After washing

Set programme selector to $
1.
(Off).
Open appliance door and remove
2.
washing.
Notes
– Do not leave any items
of washing in the drum.
In the next wash they may shrink
or discolour something else.
– Remove any foreign objects from
the drum and the rubber seal.
Notes
– Leave detergent drawer and door
open so that residual water can
evaporate.
– Always remove the washing.
Turn off the tap.
3.
I (Start/