Changing The Light Bulbs - Galanz GLOMJB17S2ASWZ-10 User Manual

CLEAN AND CARE
4 Replace the charcoal lter. Make sure that the wire mesh is visible from the front.
Charcoal
lter
5 Carefully push the louver back into place and replace the louver mounting screws.

Changing the light bulbs

Countertop light (exterior)
1 Disconnect power to the microwave at the circuit breaker or by unplugging it.
2 Remove the screw holding the light cover in place, then remove the light cover.
3 Remove the old light bulb, then replace with a new bulb.
4 Replace the light cover and secure it with the screw.
CAUTION
The light cover may become very hot. Do not touch the glass when the light is on.
CAUTION
Do not use a bulb larger than 30 watts.
BOTTOM
Screw
Light cover
Louver
Light bulbs
19