Firmware Upgrade For Cpu - Philips ME5P Service Manual

74 ME5P 15" & 20"
Go to cover page
Configuration and procedure
"Easywriter " The software is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 106 10396)
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
3. ISP Software " Easywrite "
4. DDC2BI_ISP TOOL (3138 106 10396)
Parallel Port to Print Port in PC
D-SUB to monitor
5 . Connect DDC2BI_ISP TOOL
in Fig. 2.
Monitor (A)
Connect to
Mains cord
Video cable
6. Install and setup the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\ME5P 15&20
Step 2 : Copy the Software Easywriter
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the
Application as Fig. 4.
ME5P 15&20

Firmware Upgrade for CPU

is for the interface between
as shown in Fig. 1
and Mains cord to Monitor as shown
PC
Connect to Mains
cord at this moment.
ISP box
Fig.2
.zip into your folder
Step 5 :Copy the hex file to C:\ME5P 15&20 as shown in Fig. 5 .
ME5P
Fig. 1
Update the firmware
1. Double click the Easywriter.exe icon in desktop then appears
window as shown in Fig.7 .
170C6(B)
Fig. 3
ME5P 15&20
MF5_NAFTA_15
_ALL.hex
Fig. 4
Fig. 5
Fig. 6
Fig. 7