Philips ME5P Service Manual

15" & 20" lcdtv
Hide thumbs Also See for ME5P:

Advertisement

Quick Links

ME5P 15" & 20" LCDTV
Service
Service
Service
Description
Important Safety Notice ------------------------------2
On-screen Display(OSD)------------------------ 51~52
Aging Mode ------------------------------------------- 53
Warning Message ------------------------------------ 54
Factory Mode ----------------------------------------- 55
Troubling Shooting ---------------------------------- 56
Panel Failure Mode ---------------------------------- 57
Wiring Diagram -------------------------------------- 58
Mechanical Instructions ------------------------ 59~60
Electrical Instructions -------------------------- 61~64
Display Adjustments -------------------------- 65~66
Safety Test Requirement ---------------------------- 67
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Published by BCU Monitors
Printed in Suzhou
Family:
NAFTA-----ML1.1U AA
China/AP--ML1.1A AA
EU----------ML1.1E AA

TABLE OF CONTENTS

Description
Page
DDC Instructions & DDC Data ------------------ 68~73
Firmware Upgrade for CPU --------------------- 74~75
«
Function Block Diagram-------------------------------76
Power Control Schematic Diagram & C.B.A -103~105
Exploded View--------------------------------------- 106
Spare parts list --------------------------------107~109
Different Parts List --------------------------- 110~112
Repair Tips ------------------------------------ 113~114
Repair Flow Chart ---------------------------- 115~116
Direction for User ---------------------------- 117~151
SAFETY NOTICE
Copyright reserved
Subject to modification S
Horizontal frequencies
15" 30 - 49 KHz
20" 30 - 40 KHZ
Sep. 07 2005
Page
GB
3122 785 15681

Advertisement

Table of Contents
loading

Summary of Contents for Philips ME5P

  • Page 1: Table Of Contents

    ME5P 15" & 20" LCDTV Service Family: Service NAFTA-----ML1.1U AA Service China/AP--ML1.1A AA EU----------ML1.1E AA Horizontal frequencies 15" 30 - 49 KHz TABLE OF CONTENTS 20" 30 - 40 KHZ Description Page Description Page DDC Instructions & DDC Data ------------------ 68~73...
  • Page 2: Important Safety Notice

    TO ENSURE THE CONTINUED RELIABILITY OF THIS Company** Equipment. The service procedures PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S recommended by Philips and described in this service REPLACEMENT PARTS, WHICH ARE LISTED WITH manual are effective methods of performing service THEIR PART NUMBERS IN THE PARTS LIST SECTION operations.
  • Page 3: General Product Specification(15")

    . XGA 15inch color TFT LCD flat panel . Easy tilt base . Anti-glare to reduce light reflection . Power management capability . VESA standard wall mount kit (option) 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 4 3.3.1.3 Vertical scanning 3.3.1.4 Input connectors 3.3.1.5 Available timings 3.3.2 TV interface 3.3.2.1 TV special setting 3.3.3 Electric characteristics of I/O Power input connection Power management Display identification 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 5 6.1 Susceptibility of display to external environment 6.2 Transportation tests 6.3 Display disturbances from external environment Reliability 7.1 Mean time between failures Quality assurance requirements 8.1 Acceptance test Serviceability 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 6 1024x768/60Hz non-interlaced. 2.0 Product profile Philips 15” multifunction LCD Monitor can connect to PC ‘ s analog D-SUB connector, and also support DVI, TV, S-Video, YPbPr/HD, and AV interface . Meet world wide major TV system: NAFTA 2.1 LCD...
  • Page 7 S-Video ,RCA AV with L/R Audio-in and YPbPr with L/R Audio-in. 2.10 Ambient temperature: 0 - 35 °C 2.11 Regulatory compliance : Safety : CUL and UL UL 60065 : FCC FCC part 15 Class B 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 8 User interface On screen display user control via keypad and remote control for PC, and TV OSD. 3.2.1 Keypad definition Top : key pad Control Left Right Menu Down 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 9 4. “Up/Down” also is Channel Hot Key (TV mode) 5. Press hot Key <B> and <C> can auto-adjust picture position, phase and clock in PC mode. Power LED: Normal working: Green Power saving : Red. 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 10 PC interface 3.3.1.1 Mode storing capacity Pre-load : 11 User modes : 14 3.3.1.2 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 - 49 KHz 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 11 TMDS data0- TMDS data0+ TMDS data0 shield TMDS clock shield TMDS clock+ TMDS clock- Analog R Analog G Analog B Analog H-sync Analog GND (Analog R, G, B return) 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 12 13.714(480 lines ) 12.80 (480 lines) S ( ms ) 0.086( 3 lines ) 0.027 ( 1 line ) SYNC. H/V - / - POLARITY Or -/- SEP . SYNC 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 13 15.880(768 lines) 12.795 (768 lines) S ( ms ) 0.020 ( 1 lines) 0.062(3 lines) 0.017 ( 1 line ) SYNC. H/V - / - POLARITY SEP . SYNC 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 14 WE version NAFTA version AP version China version Closed caption V-chip Teletext Remote NAFTA version NAFTA version NAFTA version NAFTA version controller(RC5) Channel number US Air 68, cable 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 15 - CC-1 .. CC-4 decoding and display - TXT1..TXT4 Text mode - No Extended Data Services (EDS) - Support violence rating and checking - Automatic CC-1 selection at user mute 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 16 - ESD-protected : 15 kV YPbPr: - Location : Rear side - Connector type: RCA connectors Input : 75 S-video: - Location : Rear side - Input : 75 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 17 LED shows amber color. The way to wake up: 1.“Source” key on remote controlà change to TV source directly. 2.“Standby” key on remote control. 3.6 Display identification In accordance with DDC requirement – “DDC2B”. 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 18 VESA Brightness: Typical 450 nits at maximum contrast and Brightness. (at center of the screen, Fig. 1 ) Im age size 4.4.1 Actual display size 304.1 x 228.1mm 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 19 4.8 TV picture centering Use CVBS (PAL and NTSC) input with cross hatch pattern to check the picture centering and should be Left(size)-right(size) < +/- 3mm. Up(size)-down(size) < +/- 3mm. 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 20 Carton dimension : 417mm W x 200mm H x 426mm D Gross weight : 5.8 Kg 5.4.2 Block unit / Palletization (Sea shipment) layers/block sets/layer sets/block unit 60/40 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 21 Test Test Electrical function ok Result Mechanical function ok No serious damage on set appearance 6.3 Display disturbances from external environment According to IEC 801-2 for ESD disturbances 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 22 The serviceability of this monitor should fulfill the requirements which are prescribed in UAW-0346 and must be checked with the check list UAT-0361. Fig 1: Brightness and Uniformity measure points H/10 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23...
  • Page 23 602-608 609.25 613.75 608-614 615.25 619.75 614-620 621.25 625.75 620-626 627.25 631.75 626-632 633.25 637.75 632-638 639.25 643.75 638-644 645.25 649.75 644-650 651.25 655.75 650-656 657.25 661.75 656-662 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 24 114-120 121.25 125.75 120-126 127.25 131.75 126-132 133.25 137.75 132-138 139.25 143.75 138-144 145.25 149.75 144-150 151.25 155.75 150-156 157.25 161.75 156-162 163.25 167.75 162-168 169.25 173.75 168-174 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 25 414-420 421.25 425.75 420-426 427.25 431.75 426-432 433.25 437.75 432-438 439.25 443.75 438-444 445.25 449.75 444-450 451.25 455.75 450-456 457.25 461.75 456-462 463.25 467.75 462-468 469.25 473.75 468-474 15" ME5P TFT XGA LCD Monitor/TV BRAND: PHILIPS 2005-06-23 ISON KUO 2005-06-23...
  • Page 26 744-750 751.25 755.75 750-756 757.25 761.75 756-762 763.25 767.75 762-768 769.25 773.75 768-774 775.25 779.75 774-780 781.25 785.75 780-786 787.25 791.75 786-792 793.25 797.75 792-798 799.25 803.75 798-804 15" ME5P TFT XGA LCD Monitor/TV BRAND: Philips 2005-06-23 ISON KUO 2005-06-23...
  • Page 27 . MAX. resolution 800 x 600 non-interlace at 60 Hz . SVGA 20inch color TFT LCD flat panel . Easy tilt base . Anti-glare to reduce light reflection . Power management capability 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 28 Visual characteristics 4.1 Test conditions 4.2 Resolution 4.3 Brightness 4.4 Image size 4.4.1 Actual display size 4.5 Brightness uniformity 4.6 PC white color adjustment 4.7 TV white color adjustment 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 29 6.1 Susceptibility of display to external environment 6.2 Transportation tests 6.3 Display disturbances from external environment Reliability 7.1 Mean time between failures Quality assurance requirements 8.1 Acceptance test Serviceability 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 30 This specification describes a 20" multifunction LCD Monitor, maximum resolution up to 800x600/60Hz non-interlaced. 2.0 Product profile Philips 20" multifunction LCD Monitor can connect to PC ‘ s analog D- SUB connector, and also support DVI, TV, S-Video, ,YPbPr/HD, and AV interface .
  • Page 31 S-Video ,RCA AV with L/R Audio-in and YPbPr with L/R Audio-in. 2.10 Ambient temperature : 0 - 35 2.11 Regulatory compliance : Safety : CUL and UL UL 60065 : FCC FCC part 15 Class B 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 32 Length : 1.5 M +/- 50 mm YPbPr cable (option) Length : 1.5M +/- 50mm User interface On screen display user control via keypad and remote control for PC, and TV OSD. 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 33 4. “Up/Down” also is Channel Hot Key (TV mode) 5. Press hot Key <B> and <C> can auto-adjust picture position, phase and clock in PC mode. 6. AV key is for switching input signal from PC/DVI/TV/AV/S-Video/HD. 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO...
  • Page 34 All PC or TV OSD menu function could be accomplished by remote control. PC and TV requirement 3.3.1 PC interface 3.3.1.1 Mode storing capacity Pre-load User modes : 14 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 35 TMDS data0- TMDS data0+ TMDS data0 shield TMDS clock shield TMDS clock+ TMDS clock- Analog R Analog G Analog B Analog H-sync Analog GND (Analog R, G, B return) 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 36 13.714(480 lines ) 12.80 (480 lines) S ( ms ) 0.086( 3 lines ) 0.027 ( 1 line ) SYNC. H/V - / - POLARITY Or -/- SEP . SYNC 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 37 ( 1 line ) 0.026 ( 1 line ) 0.021 ( 1 line ) SYNC. H/V + / + + / + + / + POLARITY SEP . SYNC 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 38 Scaler MCU WE version NAFTA version AP version China version Closed caption V-chip Teletext Remote NAFTA version NAFTA version NAFTA version NAFTA version controller(RC5) Channel number US Air 68, cable 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 39 - CC-1 .. CC-4 decoding and display - TXT1..TXT4 Text mode - No Extended Data Services (EDS) - support violence rating and checking - Automatic CC-1 selection at user mute 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 40 - ESD-protected : 15 kV YPbPr: - Location : Rear side - Connector type : RCA Jack Input : 75ohm . S-video: - Location : Rear side - Input : 75ohm . 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 41 LED shows red color. The way to wake up: 1.”Source” key on remote controlà change to TV source directly. 2.”Standby” key on remote control. Display identification In accordance with DDC requirement – “DDC2B”. 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 42 35.2K/56HZ (+/+) VESA 800X600 37.9K/60HZ (+/+) VESA 800X600 46.9K/75HZ 49.498 (+/+) VESA Brightness: Typical 450 nits at maximum contrast and Brightness. (at center of the screen, Fig. 1 ) 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 43 4.8 TV picture centering. Use CVBS (PAL and NTSC) input with cross hatch pattern to check the picture centering and should be Left(size)-right(size) < +/- 3mm. Up(size)-down(size) < +/- 3mm. 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 44 5.4.1 Shipping dimension/Weight Carton dimension : 547mm W x 222mm H x 549mm D Gross weight : 10.5 Kg 5.4.2 Block unit / Palletization (Sea shipment) layers/block sets/layer sets/block unit 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 45 Sequence --- PACKAGING Vibrati 7 Hz , 1.05G, 30 min. for transport direction only Test Test Electrical function ok Result Mechanical function ok No serious damage on set appearance 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 46 The serviceability of this monitor should fulfill the requirements which are prescribed in UAW-0346 and must be checked with the check list UAT-0361. Fig 1: Brightness and Uniformity measure points H/10 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO...
  • Page 47 607.75 602-608 609.25 613.75 608-614 615.25 619.75 614-620 621.25 625.75 620-626 627.25 631.75 626-632 633.25 637.75 632-638 639.25 643.75 638-644 645.25 649.75 644-650 651.25 655.75 650-656 657.25 661.75 656-662 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 48 119.75 114-120 121.25 125.75 120-126 127.25 131.75 126-132 133.25 137.75 132-138 139.25 143.75 138-144 145.25 149.75 144-150 151.25 155.75 150-156 157.25 161.75 156-162 163.25 167.75 162-168 169.25 173.75 168-174 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 49 407.75 402-408 409.25 413.75 408-414 415.25 419.75 414-420 421.25 425.75 420-426 427.25 431.75 426-432 433.25 437.75 432-438 439.25 443.75 438-444 445.25 449.75 444-450 451.25 455.75 450-456 457.25 461.75 456-462 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 50 749.75 744-750 751.25 755.75 750-756 757.25 761.75 756-762 763.25 767.75 762-768 769.25 773.75 768-774 775.25 779.75 774-780 781.25 785.75 780-786 787.25 791.75 786-792 793.25 797.75 792-798 799.25 803.75 798-804 20" ME5P TFT LCD TV BRAND: PHILIPS 2005-06-22 ISON KUO 2005-06-22...
  • Page 51: On-Screen Display(Osd)

    On Screen Display ME5P 15" & 20" Go to cover page PC MODE 1st Layer 2nd Layer 3rd Layer PICTURE COLOR TEMP NORMAL WARM COOL BRIGHTNESS CONTRAST AUTO ADJUST IN PROGRESS STORE? MANUAL ADJUST PHASE CLOCK HORIZONTAL VERTICAL AUDIO AUTO SOUND...
  • Page 52 ME5P 15" & 20" On Screen Display Go to cover page FEATURES PICTURE FORMAT (4:3) EXPAND 4:3 (HD 4:3) COMPRESS 16:9 PICTURE ALIGNMENT AUTO LOCK LOCK PROGRAM CHANGE CODE CLEAR ALL BLOCK OPTION MOVIE RATING ON/OFF ON/OFF PG13 ON/OFF ON/OFF...
  • Page 53: Aging Mode

    Aging Mode ME5P 15" & 20" Go to cover page ATTENTION ATTENTION NO VIDEO INPUT NO VIDEO INPUT Access Aging.. Mode Step 1 : Select the source "PC" and then turn off LCD-TV, and disconnect Interface Cable between Monitor and PC.
  • Page 54: Warning Message

    Warning Message ME5P 15" & 20" Go to cover page 1.Automatic adjustment (for factory only) Press Volume+ and Volume- on front key at the same time (PC mode only). It adjusts PC image to the best and save the screen automatically.
  • Page 55: Factory Mode

    INSTALL AUTO ADJUST MANUAL ADJUST ME5P NAFTA20 V0.45.1 050527 AU20SVGA Fig.1 Use the CHNNEL- and CHNNEL+ to select the "ME5P NAFTA20 V0.45.1 050527 AU20SVGA" and then press the "VOL +" button Menu Item Description Scalar Gain R G B Scalar Gain for Normal/Warm/Cool in PC mode.
  • Page 56: Troubling Shooting

    Trouble shooting ME5P 15" & 20" Go to cover page No Power .Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then reinsert the plug into the outlet. Press POWER to turn on the TV again.
  • Page 57: Panel Failure Mode

    Failure Mode Of Panel ME5P 15" & 20" Go to cover page Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
  • Page 58: Wiring Diagram

    Wiring diagram ME5P 15" & 20" Go to cover page...
  • Page 59: Mechanical Instructions

    Mechanical Instructions ME5P 15" & 20" Go to cover page Front View 4. Remove the metal frame board - Remove the screws as shown in Fig.7 and Fig.8 - Remove the metal frame board For 15" Fig.1 Back View Fig.5 For 20"...
  • Page 60 Mechanical Instructions ME5P 15" & 20" Go to cover page 6. Remove the speaker - Remove the screws on the speakers as shown in Fig.12 and Fig.13, 5. Remove all PCB then remove the speakers from the bezel - Remove all screws as shown in Fig.9 and Fig.10 - Unplug all connector as shown in Fig.11...
  • Page 61: Electrical Instructions

    Electrical Instructions ME5P 15" & 20" Go to cover page General points Dot rate H.freq (KHz) Mode Resolution V.freq (Hz) (MHz) 25.175 31.469 IBM VGA 640 * 350 70.087 During the test and measuring, supply a distortion free AC mains voltage to the apparatus via an isolated transformer with low 28.322...
  • Page 62 ME5P 15" & 20" Electrical Instructions Go to cover page Table 3.1: Readings with Minolta CA-110. FACTORY ADJUST MENU NORMAL SCALER GAIN R G B AUTO-COLOR (OK) ADC OFFSET R G B ADC GAIN R G B PC OFFSET R G B...
  • Page 63 Electrical Instructions - For 15" ME5P 15" & 20" Go to cover page . Preset EEPROM data PERS MULTIM S-Video ONAL RICH URE SOFT EDIA EEPROM data has to be preset data according following table. Factory mode preset. Brightness Preset value...
  • Page 64 Electrical Instructions- For 20" ME5P 15" & 20" Go to cover page 7. Preset EEPROM data HD (YPbPr) PERSONAL RICH NATURE SOFT MULTIMEDI EEPROM data has to be preset data according following table. Brightness Factory mode preset. Color Preset value...
  • Page 65: Display Adjustments

    2.1 Aim the probe CA-A30 at the center of screen as Fig. 4 MANUAL ADJUST 2.2 Remove the lens protective cover of probe CA-A30. ME5P NAFTA20 V0.45.1 050527 AU20SVGA 2.3 Set Measuring/viewing selector to Measuring position for reset Fig. 1 analyzer.
  • Page 66 Display Adjustment ME5P 15" & 20" Go to cover page " " 2.9 Set smart picture as NORMAL Set SCALER GAIN R G B = VIDEO SCALER GAIN R G B(alignment done). The 1931 CIE chromaticity (X, Y) co-ordinates shall be: Normal/ 0.292 ±...
  • Page 67: Safety Test Requirement

    Safety Test Requirements ME5P 15" & 20" Go to cover page 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both testing. Hipot Ground Continuity 3.1. Equipments...
  • Page 68: Ddc Instructions & Ddc Data

    ME5P 15" & 20" DDC Instructions Go to cover page General Pin Assignment DDC Data Re-programming The digital only connector contains 24 signal contacts organized in In case the DDC data memory IC or main EEPROM which storage all three rows of eight contacts. Signal pin assignments are listed in the...
  • Page 69 DDC Instructions ME5P 15" & 20" Configuration and procedure 3. At the submenu, type the letter of your computer's hard disk drive followed by :EDID45 (for example, C:\EDID45, as shown in Fig. 6). There are 3 chips contained OSD string, serial number..etc on the circuit board, main EEPROM which storage all factory settings,OSD string.
  • Page 70 ME5P 15" & 20" DDC Instructions Step 3: Modify DDC data (verify EDID version, week, year) Re-programming Digital DDC IC Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
  • Page 71 DDC Instructions ME5P 15" & 20" Go to cover page Step 7: Exit DDC program Step 5: Write DDC data 1. Configuration should be as Fig. 17. And press OK. Pull down the File menu and select Exit as shown in Fig. 19.
  • Page 72 ME5P 15" & 20" DDC Data - For 15" Go to cover page ********************************************************************** Manufacturer's timings EDID log file Standard Timing Identification : Unused ********************************************************************** Monitor Descriptor #1 Vendor/Product Identification Serial Number ID Manufacturer Name : PHL ID Product Code : 4650 (HEX.)
  • Page 73 ME5P 15" & 20" DDC Data - For 20" Go to cover page Standard Timing Identification : Unused *************************************************** EDID log file Monitor Descriptor #1 *************************************************** Standard Timing Identification : Unused Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : C008 (HEX.)
  • Page 74: Firmware Upgrade For Cpu

    An i486 (or above) personal computer or compatible. Microsoft operation system Windows 95/98/2000/XP. Fig. 4 ISP Software " Easywrite " Step 5 :Copy the hex file to C:\ME5P 15&20 as shown in Fig. 5 . DDC2BI_ISP TOOL (3138 106 10396) as shown in Fig. 1 ME5P ME5P 15&20...
  • Page 75 Firmware Upgrade for CPU ME5P 15" & 20" Go to cover page Press the file --> exit to end program , as shown in Fig. 11. Press the Load hex then select the hex file as shown in Fig. 8.
  • Page 76: Function Block Diagram

    ME5P 15" & 20" Function Block Diagram Go to cover page...
  • Page 77: Scaler Schematic Diagram & C.b

    ME5P 15" & 20" Schematic Diagram of scaler 1 - for 15" & 20" Go to cover page...
  • Page 78 Schematic Diagram of scaler 2 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 79 ME5P 15" & 20" Schematic Diagram of scaler 3 - for 15" & 20" Go to cover page...
  • Page 80 Schematic Diagram of scaler 4 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 81 ME5P 15" & 20" Schematic Diagram of scaler 5 - for 15" & 20" Go to cover page...
  • Page 82 Schematic Diagram of scaler 6 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 83 ME5P 15" & 20" Schematic Diagram of scaler 7 - for 15" & 20" Go to cover page...
  • Page 84 Schematic Diagram of scaler 8 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 85 ME5P 15" & 20" Schematic Diagram of scaler 9 - for 15" & 20" Go to cover page...
  • Page 86 Schematic Diagram of scaler 10 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 87 ME5P 15" & 20" Schematic Diagram of scaler 11 - for 15" & 20" Go to cover page...
  • Page 88 Schematic Diagram of scaler 12 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 89 ME5P 15" & 20" Scaler Board C.B.A 1 - for 15" & 20" Go to cover page...
  • Page 90 Scaler Board C.B.A 2 - for 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 91: Ypbpr-In Pcb Schematic Diagram & C.b

    YPbPr-IN PCB Schematic Diagram - For 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 92 YPbPr-IN PCB C.B.A 1 - For 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 93 YPbPr-IN PCB C.B.A 2 - For 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 94: Key Pcb Schematic Diagram & C.b

    KEY PCB Schematic Diagram - For 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 95 KEY PCB C.B.A 1 - For 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 96 KEY PCB C.B.A 2 - For 15" & 20" ME5P 15" & 20" Go to cover page...
  • Page 97: Ir/Led Pcb Schematic Diagram & C.b

    IR/LED PCB Schematic Diagram - Only for 15" ME5P 15" & 20" Go to cover page...
  • Page 98 IR/LED PCB C.B.A 1 - Only for 15" ME5P 15" & 20" Go to cover page...
  • Page 99 IR/LED PCB C.B.A 2 - Only for 15" ME5P 15" & 20" Go to cover page...
  • Page 100 IR/LED PCB Schematic Diagram - Only for 20" ME5P 15" & 20" Go to cover page...
  • Page 101 IR/LED PCB C.B.A 1 - Only for 20" ME5P 15" & 20" Go to cover page...
  • Page 102 IR/LED PCB C.B.A 2 - Only for 20" ME5P 15" & 20" Go to cover page...
  • Page 103 Power Control Schematic Diagram - Only for 15" ME5P 15" & 20" Go to cover page...
  • Page 104 Power Control C.B.A 1 - Only for 15" ME5P 15" & 20" Go to cover page...
  • Page 105 Power Control C.B.A 2 - Only for 15" ME5P 15" & 20" Go to cover page...
  • Page 106: Exploded View

    Exploded View ME5P 15" & 20" Go to cover page Type: 15PF5120/28...
  • Page 107: Spare Parts List

    2025 223858619805 CER2 0603 Y5V 50V 10N P8020 R 2255 223886715331 CER1 0603 NP0 50V 330P PM5 R 0143 312123346091 Philips Product Reg. Card 2026 223878615647 CER2 0603 X7R 16V 68N PM10 R 2256 223886715331 CER1 0603 NP0 50V 330P PM5 R...
  • Page 108 ME5P 15" & 20" Spare Parts Lists Go to cover page 3312 232270260472 RST SM 0603 RC21 4K7 PM5 R 3011 232270260102 RST SM 0603 RC21 1K PM5 R 2436 223878615649 CER2 0603 X7R 16V 100N PM10 R 3313 232270260472 RST SM 0603 RC21...
  • Page 109 ME5P 15" & 20" Spare Parts Lists Go to cover page 5301 242254944197 IND FXD 0805 EMI 100MHZ 220R R 3932 212211805964 RST SM 0603 RC0603 75R PM1 R 5302 242254944197 IND FXD 0805 EMI 100MHZ 220R R 3933 232270260339 RST SM 0603 RC21...
  • Page 110: Different Parts List

    Different Parts List ME5P 15" & 20" Go to cover page Diversity of 15PF5120/79 compared with 15PF5120/28 2671 223858619812 CER2 0603 Y5V 50V 100N P8020 R Item 12NC Description 2673 223858619812 CER2 0603 Y5V 50V 100N P8020 R 0030 313815760631 FRONT CABINET ASSY...
  • Page 111 Different Parts List ME5P 15" & 20" Go to cover page 1054 313815863261 IR / LED PCB ASSY(20") 1176 313923809801 PROD ASSY RC1683801/01 PKD 1180 313815864861 MAIN FRAME + WIRE ASSY - AUO 1177 313818876601 CON ACC ADP V 01P M 0.00/PAL B 1183 313819875691 PSU OPENFR INVBL6(T50I061.00)
  • Page 112 Different Parts List ME5P 15" & 20" Go to cover page 1177 313818876601 CON ACC ADP V 01P M 0.00/PAL B 1351 313815864521 CPU ASSY(AUO) AP 1355 313815864531 EEPROM ASSY(AUO) AP 1601 313914722641 FRONTEND FQ1216ME/I H-5 1671 243854300079 RES XTL SM 12MHZ 32P SMD-49 R...
  • Page 113: Repair Tips

    Repair Tips ME5P 15" & 20" Go to cover page 0. Warning preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). All ICs and many other semi-conductors are susceptible to - The chip, once removed, must never be reused.
  • Page 114 ME5P 15" & 20" Go to cover page 3. Lead-free product identification You can identify lead-free product by Philips-lead-free logo on PCB. 4. Lead-free product repair instruction 4.1 Use only lead-free Solder Alloy 0622 149 00106(1.2mm SAC305) or 0622 149 00108(1.0mm SAC305).
  • Page 115: Repair Flow Chart

    Repair Flow Chart ME5P 15" & 20" Go to cover page 3.No picture/LED 1.No Work/LED is off is green Check if Check circuit around power switch Check if working voltage Replace power switch each regulator and is normal pin3=3.3V of 7303 eliminate short and 3307=3.3V 3313=5V...
  • Page 116 Repair Flow Chart ME5P 15" & 20" Go to cover page 5.no TV sound 8.LED and function key poor Check if tuner 1501 pin 10 output 2nd IF Replace 1501 signal Check circuit around control board and cable between control board and...
  • Page 117: Direction For User

    Thank you for choosing Philips. Need help fast? Read your user Manual and/or Quick-Use Guide first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.usasupport.philips.com...
  • Page 118: Welcome/Registration Of Your Tv

    ARD TODAY TO GET THE VERY MOST FROM YOUR PURCHASE Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once to ensure:...
  • Page 119: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS EAD BEFORE OPERATING EQUIPMENT Read these instructions. exhibits a marked change in performance; Keep these instructions. E. The appliance has been dropped, or the enclosure Heed all warnings. damaged. Follow all instructions. Tilt/Stability - All televisions must comply with Do not use this apparatus near water.
  • Page 120: Precautions

    RECAUTION ADDITIONAL SAFETY PRECAUTIONS • ENSURE that LCD TV stand is tightened properly to the set (See Quick Guide on the right way of tightening of the screw of the stand to the set. Improper tightening of screw may render the set unsafe. •...
  • Page 121: Table Of Contents

    ONTENTS Here are a few of the special features of your new LCD Introduction Welcome/Registration of Your TV ....2 Audio/Video In Jacks: Use to quickly connect other IMPORTANT SAFETY INSTRUCTIONS .
  • Page 122: Installation

    NSTALLATION hen operate INSTALL function, the access code window will appear on the screen. Press default code (0711) or your personal code setting to enter this menu. ANGUAGE ETTINGS or English, French, Spanish or Portuguese - speaking TV owners, an onscreen LANGUAGE option is present.
  • Page 123: Tuner Mode Control

    UNER ONTROL he Tuner Mode allows you to change the LCD TV’s signal input to Cable or Air (antenna). It’s important for the LCD TV to know if you want to receive channels from a cable TV signal or an MAIN CONTROLS antenna signal.
  • Page 124: Auto Program (Setting Up Channels)

    ROGRAM ETTING HANNELS our LCD TV can automatically set itself for local area (or cable TV) channels. This makes it easy for you to select only the TV stations in your area by pressing the CH (+) or CH (-) button. MAIN CONTROLS LANGUAGE PICTURE...
  • Page 125: Channel Edit Control (To Add Or Delete Channels)

    HANNEL ONTROL hannel Edit control lets you edit the channel listing. You can add or remove a channel in the MAIN CONTROLS LCD TV’s memory. PICTURE LANGUAGE INSTALL AUDIO TUNER MODE FEATURES AUTO PROGRAM LANGUAGE CHANNEL CHANNEL EDIT INSTALL SKIPPED TUNER MODE MANUAL FINE TUNE AUTO PROGRAM...
  • Page 126: Factory Reset

    ACTORY ESET our TV can be reset to the original factory settings by performing the following steps. MAIN CONTROLS PICTURE LANGUAGE AUDIO TUNER MODE FEATURES AUTO PROGRAM Press the MENU button on the INSTALL CHANNEL EDIT INSTALL remote control to see the onscreen LANGUAGE MANUAL FINE TUNE TUNER MODE...
  • Page 127: Unfold The Base

    NFOLD THE efore proceed to install your new LCD TV, please follow the steps and diagrams as shown to familiarize yourself with the correct and safe way of unfolding the base. Place the set facing down on a fl at surface and a protective sheet.
  • Page 128: Installing Lcd Tv On The Wall

    NSTALLING Vesa Complied Mounting The stand of your LCD TV complies with VESA standard, if you intend to install the LCD TV on the wall, please consult a professional technician for proper installing. The manufacture accepts no liability for installations not performed by professional technician. 15”...
  • Page 129: Basic Tv And Remote Control Operations

    ASIC EMOTE ONTROL PERATIONS �� � � � � � � � � ���������������� + TELEVISION AND REMOTE CONTROL � � Plug the DC adapter into the DC IN 16V jack on the LCD TV. Plug the power cable into an outlet.
  • Page 130: Remote Control

    EMOTE ONTROL Power button Status/Exit Button- Press to turn the LCD TV on or off. Press to see the current channel number on the TV screen. Also CC button press to clear the TV menu after Press the CC button to select CC on control adjustments.
  • Page 131: Timer Menu Controls

    IMER MENU CONTROLS our LCD TV comes with an onscreen clock. The TV can also be set to turn on or off at a specific time and tune to a specific channel when it powers itself on. SLEEP OFF Press the SLEEP button on the remote control to show the onscreen menu..
  • Page 132: Auto Picture Control

    TV P ICTURE ONTROLS o adjust your LCD TV picture, select a channel and follow these steps. MAIN CONTROLS Press the MENU button to see the PICTURE AUTO PICTURE PICTURE AUDIO BRIGHTNESS onscreen menu. PERSONAL AUTO PICTURE FEATURES COLOR RICH BRIGHTNESS CONTRAST INSTALL...
  • Page 133: Tv Picture Menu Controls

    TV S OUND ONTROLS o adjust your LCD TV Sound, select a channel and MAIN CONTROLS follow these steps. PICTURE AUTO SOUND AUDIO SETTINGS Press the MENU button to see the menu. FEATURES STEREO AUDIO INCREDIBLE SURROUND INSTALL AUTO SOUND PERSONAL VOICE SETTINGS...
  • Page 134: Tv Sound Menu Controls

    ICTURE ONTROL hether you’re watching a movie or a video game, your LCD TV has video control preset that will match with your current program source or content. Auto Picture quickly resets your TV’s video controls for a number of different types of programs and viewing Personal conditions that you may have in your home.
  • Page 135: Auto Lock

    MOVIE RATING TV RATING he AUTO Lock feature is an integratedcircuit that receives and PG13 processes data sent by broadcasters, or other program NC17 providers, that contain program content advisories.When programmed MOVIE RATINGS TV RATINGS by the viewer, a TV with AUTO Lock can respond to the content G: General Audience - All ages TV-Y All children - Appropriate for...
  • Page 136: Auto Lock Access Code

    CCESS ver the next few pages you’ll learn how to block programs and understand the rating terms for certain broadcasts. First, set an access code. MAIN CONTROL PICTURE FORMAT PICTURE AUDIO PICTURE ALIGNMENT FEATURES AUTOLOCK FEATURES Press the MENU button to see the INSTALL CLOSED CAPTION LOCK PROGRAM...
  • Page 137: Auto Lock Program

    ROGRAM fter your personal access code has been set (see the previous page), you are ready to select the channels or inputs you want to block out or censor. MAIN CONTROL PICTURE FORMAT PICTURE AUDIO PICTURE ALIGNMENT FEATURES AUTOLOCK FEATURES INSTALL CLOSED CAPTION Press the MENU button to see the...
  • Page 138: Auto Lock - Movie Ratings

    OVIE ATINGS he AUTO Lock feature can block programming based on the Movie Industry ratings. Once you’ve entered your access code and the AUTO Lock features are displayed on the MAIN CONTROL PICTURE PICTURE FORMAT screen: AUDIO PICTURE ALIGNMENT FEATURES AUTOLOCK FEATURES INSTALL...
  • Page 139: Auto Lock - Tv Ratings

    - TV R ATINGS he AUTO Lock feature can block programming based on the TV Industry ratings.Once you’ve entered your access code and MAIN CONTROL the AUTO Lock features are displayed on the PICTURE FORMAT PICTURE AUDIO PICTURE ALIGNMENT screen: FEATURES AUTOLOCK FEATURES...
  • Page 140: Using The Picture Format

    SING ICTURE ORMAT ou can change the picture format size to match the type of program you are watching. Select the normal 4:3, EXPAND 4:3, or COMPRESS 16:9, or aspect ratios. MAIN CONTROL PICTURE FORMAT PICTURE PICTURE ALIGNMENT AUDIO AUTOLOCK FEATURES FEATURES CLOSED CAPTION...
  • Page 141: Surf Control

    ONTROL list or series of previously viewed channels can be selected with the SURF button on your remote SURF EDIT ADD? control. With this feature, you can easily switch between different TV channels that currently interest SURF EDIT Delete? you. The SURF control allows you to set up to 8 SURF LIST EMPTY channels in its quick viewing list.
  • Page 142: Closed Captions

    LOSED APTIONS losed Captioning (CC) allows you to read the voice content of television programs on MAIN CONTROL PICTURE FORMAT PICTURE the TV screen. Designed to help the hearing impaired, AUDIO PICTURE ALIGNMENT FEATURES AUTOLOCK FEATURES this feature uses onscreen “text boxes” to show INSTALL CLOSED CAPTION PICTURE FORMAT...
  • Page 143: Pc Picture Controls

    PC P ICTURE ONTROLS his TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go into MAIN CONTROLS PICTURE COLOR TEMP standby mode. The PC Picture controls allow you to AUDIO BRIGHTNESS PICTURE...
  • Page 144: Pc Audio Controls

    PC A UDIO ONTROLS his TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go MAIN CONTROLS into standby mode. The AUDIO controls allow you PICTURE AUTO SOUND to adjust the sound. AUDIO SETTINGS AUDIO...
  • Page 145: Using Pc Pip (Picture In Picture) Feature

    PC PIP (P SING ICTURE ICTURE EATURE IP (Picture-in-Picture) feature allows you to call up a subscreen when you are using your TV as a monitor. Note: Make sure you are in PC mode. MAIN CONTROLS PICTURE AUDIO FEATURES FEATURES Press the MENU button to see the INSTALL SIZE...
  • Page 146: Setting Up The Pc Mode

    PC M ETTING ERSONAL OMPUTER ONITOR 15PF5120 (15” LCD TV) Resolution Mode V. Frequency (Hz) H. Frequency (kHz) 640 x 480 VGA VESA 60 59.940 31.469 SVGA VESA 56 56.250 35.156 800 x 600 SVGA VESA 60 60.317 37.897 1024 x 768 XGA VESA 60 60.004 48.363...
  • Page 147: Trouble Shooting Tips

    ROUBLE HOOTING S-VHS Color Becomes Faint No Power • Unplug socket for S-Video connection. Reconnect • Check the TV power cord. Unplug the TV, wait 10 the S-Video socket of the TV carefully to the VCR seconds, then reinsert the plug into the outlet and push the POWER button again.
  • Page 148: Care And Cleaning

    LEANING WARNING concerning stationary images on the TV Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not leave still images on screen for extended periods of time.
  • Page 149: Index

    NDEX Auto Program ......7, 8, 31 Balance ........17, 28 Bass .
  • Page 150: Regulatory

    EGULATORY (FCC) N (U.S. O EDERAL OMMUNICATIONS OMMISSION OTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 151: Limited Warranty

    Philips will repair or replace the product, at its WARRANTY IS THE EXCLUSIVE REMEDY FOR THE option, at no charge, or pay the labor charges to any Philips CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY authorized service center. After the period of one (1) year, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH Philips will no longer be responsible for charges incurred.

Table of Contents