Factory Mode - Philips ME5P Service Manual

Access factory. Mode
how to get into factory mode menu
Step 1 : Select the source "PC" and then turn off LCD-TV.
Step 2 : [Push "power " button and then push the "VOL- " and "VOL+"
buttons at the same time immediately and hold it] about five seconds
then release all buttons.
Press "menu"button and bring up factory mode indication as shown in
Fig.1
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
INSTALL
ME5P NAFTA20 V0.45.1 050527 AU20SVGA
Fig.1
Use the CHNNEL- and CHNNEL+ to select the "ME5P NAFTA20
V0.45.1 050527 AU20SVGA" and then press the "VOL +" button
Menu Item
Scalar Gain R G B
Auto-Color
ADC Offset R G B
ADC Gain R G B
PC Offset R G B
711X SDTV Brightness
711X SDTV SAT.
711X SDTV Contrast
711X SDTV TINT
TV Shift H V
HD Shift H V
Show Lock Message
HDTV ADC Offset R G B
HDTV ADC Gain R G B
Video Scalar Gain R G B
Scalar Hue

Factory Mode

800X600@60HZ @60HZ
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
Description
Scalar Gain for Normal/Warm/Cool in PC mode.
Adjust color from received signal (either in PC or
HDTV mode).
Adjust AD 9883 for PC ADC offset.
Adjust AD 9883for PC ADC gain.
PC analog scalar offset.
Adjust SA 7119 SDTV brightness.
Adjust SA 7119 SDTV saturation.
Adjust SA 7119 SDTV contrast.
Adjust SA 7119 SDTV tint (hue).
Adjust TV screen position horizontally/vertically.
Adjust HDTV screen position
horizontally/vertically.
Show OSD lock message.
Adjust AD 9883 for HDTV ADC offs e t.
Adjust AD 9883 for HDTV ADC gain.
Adjust scalar gain for Video mode.
Adjust scalar hue.
ME5P 15" & 20"
55
Go to cover page