Philips 5008 Series Service Manual page 17

Service Modes, Error Codes, and Fault Finding
Main Menu Sub-menu 1
Software maintenance Software events
Hardware events
Test setting Digital info
Install start frequency
Install end frequency
Default install frequency
Installation
Development file Development 1 file version
versions
Development 2 file version
Upload to USB Channel list
Personal settings
Option codes
Alignments
Identification data
History list
All (options included)
Download from USB Channel list
Personal settings
Option codes
Alignments
Identification data
All (options included)
NVM editor Type number
AG code
How to Navigate
• In the SAM menu, select menu items with the UP/DOWN
keys on the remote control transmitter. The selected item
will be indicated. When not all menu items fit on the screen,
use the UP/DOWN keys to display the next/previous menu
items.
• With the "LEFT/RIGHT" keys, it is possible to:
– (De) activate the selected menu item.
– (De) activate the selected sub menu.
– Change the value of the selected menu item.
• When you press the MENU button once while in top level
SAM, the set will switch to the normal user menu (with the
SAM mode still active in the background).
• Press the following key sequence on the remote control
transmitter: "062596" directly followed by the "Home"
button to switch to SDM (do not allow the display to time out
between entries while keying the sequence).
Sub-menu 2 Sub-menu 3
Display
Clear
Test reboot
Test cold reboot
Test application crash
Display
Clear
Current frequency: 175
QAM modulation: None
Symbol rate:
Original network ID: 0
Network ID: 0
Transport stream ID: 0
Service ID: 0
Hierarchical modulation: 0
Selected video PID: 16
Selected main audio PID: 16
Selected 2nd audio PID: 16
000
999
Digital only
Digital + Analogue
Display parameters
DISPT5.4.40.24
Acoustics parameters ACSTS
5.8.6.0
PQ - TV550 5.4.0.9
PQS- Profile set
PQF - Fixed settings
PQU - User styles
Ambilight parameters PRFAM
5.4.15.0
12NC one zip software
Initial main software
NVM version Q554B_0.4.0.0
Flash units software
Temp com file version none
see type plate
see type plate
back to
div. table
Q552.5HE LA
Description
Display information is for development purposes
Display information is for development purposes
Display information is for development purposes
Install start frequency from "0" MHz
Install end frequency as "999" MHz
Select Digital only or Digital + Analogue before installation
Display information is for development purposes
Display information is for development purposes
To upload several settings from the TV to an USB stick
To download several settings from the USB stick to the TV
NVM editor; re key-in type number and production code
after SSB replacement
How to Store SAM Settings
To store the settings changed in SAM mode (except the
RGB Align settings), leave the top level SAM menu by using
the POWER button on the remote control transmitter or the
television set. The mentioned exceptions must be stored
separately via the STORE button.
How to Exit SAM
Use one of the following methods:
• Switch the set to STANDBY by pressing the mains button
on the remote control transmitter or the television set.
• Via a standard RC-transmitter, key in "00" sequence.
Note: When the TV is switched "off" by a power interrupt while
in SAM, the TV will show up in "normal operation mode" as
soon as the power is supplied again. The error buffer will not be
cleared.
5. EN 17
2013-Sep-20