Table of Contents
Advertisement
Introduction
Chapter 1
1-1 Product Specifications
Processor
-
Supports Intel Celeron/Pentium 4 Socket 478 CPU
-
Supports Intel Celeron/Pentium 4 system bus at 400/533MHz
Chipset
-
Intel 845 + ICH2
Main Memory
-
Supports two 168 pin SDRAM DIMMs up to 2GB
-
Supports PC 133 SDRAM modules
Expansion Slots
-
One 1.5 V AGP slot for 4X AGP
-
Five 32-Bit PCI slots (v2.2 compatible)
Audio Subsystem via AC-Link
-
With external high quality AC'97 Codec
-
Complete software driver supports for Windows® OS
Ultra DMA 66/100 PCI IDE Controller
-
Supports two IDE ports up to 4 ATAPI devices
-
Supports PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps and Multi
Word Mode 5 up to 100MBps with Bus Mastering
-
Bus-Mastering software drivers for all common multi-tasking operating systems
Embedded USB 1.1 Controller
-
UHCI compliant USB host controller with Root hub
-
Four USB ports (UHCI v11.0 compliant) with over-current protection
-
Optional USB adapter for additional USB 1.1 ports
Onboard VIA VT6202 USB 2.0 Host Controller (Optional)
-
One EHCI USB 2.0 controllers and two UHCI USB 1.1 controllers support total
four USB 2.0/1.1 ports
-
Supports USB 2.0 high-speed device @480 Mb/s transfer rates
-
Optional USB adapter for additional USB 2.0/1.1 ports
On board ITE 8702 Super I/O Functions
-
Two UARTs support serial port and IR function (up to 115.2Kbps) for HPSIR and
ASKIR
Chapter 1
1
Chapter 1
-
One SPP/ECP/EPP parallel port
-
One floppy disk drive connector supports up to 2.88MB
Fast Ethernet Controller(Optional)
-
Onboard Realtek RTL8101L supports 10/100Mbps fast Ethernet
Boot-Block Flash ROM
-
Award system BIOS supports PnP, APM, DMI, ACPI, & Multi-device booting
features.
1-2 Package Contents
This product comes with the following components:
1. Motherboard
2. 40-Pin UDMA-100 IDE Cable
Blue to motherboard, Gray to Master and Black to Slave
3. 34-Pin floppy Disk Drive Cable
4. User's Guide
5. Driver CD
2
x 1
x 1
x 1
x 1
x 1
Advertisement
Table of Contents
