HP Compaq Presario,Presario 8380 Supplementary Manual page 57

8
Attach the IDE ribbon cable to the back side of
the drive and to the motherboard.
9
Replace the left side panel (see "Replacing the
Left Side Panel" on page 55).
10
Replace the right side panel (see "Replacing the
Right Side Panel" on page 56).
11
Replace the back panel (see "Replacing the Back
Panel" on page 57).
To install an internal 3.5-inch drive in bay 3:
1
Remove the back panel (see "Removing the Back
Panel" on page 37).
2
Remove the right side panel (see "Removing the
Right Side Panel" on page 38).
3
Remove the left side panel (see "Removing the
Left Side Panel" on page 39).
4
Install the drive in the bay 3 drive tray.
5
Install the two screws on each side of the bay 3
drive tray.
6
Attach the power cable to the back side of the
drive.
7
Attach the IDE ribbon cable to the back side of
the drive and to the motherboard.
8
Replace the left side panel (see "Replacing the
Left Side Panel" on page 55).
9
Replace the right side panel (see "Replacing the
Right Side Panel" on page 56).
10
Replace the back panel (see "Replacing the Back
Panel" on page 57).
Chapter 3 Upgrading and Servicing Your Computer
53