HP Compaq Presario,Presario 8380 Supplementary Manual page 55

Hp compaq presario,presario 8380: supplementary guide
Hide thumbs Also See for Compaq Presario,Presario 8380:
Table of Contents

Advertisement

19
Replace the right side panel (see "Replacing the
Right Side Panel" on page 56).
20
Replace the back panel (see "Replacing the Back
Panel" on page 57).
21
Reconnect the power cord.
22
Reconnect the modem cable.
23
Turn on your computer.
What Is Plug and Play?
"Plug and Play" describes the ability to add and
remove add-in cards, memory, and peripherals
without any special procedures (like resetting jumpers
and testing for system conflicts). Your system BIOS
finds these components and adds them to the
system. You do not have to run the BIOS Setup
program.
If the New Card or Device Isn't Working
Recheck all connections, including those to the card,
power supply, keyboard, and display. If the problem
still exists, run the BIOS Setup program and load the
default settings; and then save and exit. (Refer to
"Using the BIOS Setup Program" on page 58.)
Troubleshooting hints for add-in cards can be found
in the System Guide located on the HP At Home Web
site (http://www.hp-at-home.com).
Chapter 3
Upgrading and Servicing Your Computer
51

Advertisement

Table of Contents
loading

Table of Contents