Display; Fax And Phone - HP Compaq Presario,Presario 8380 Supplementary Manual

Display

My display doesn't work, even though the
computer appears to work.
Make sure that the power cord is securely
plugged into the display.
Make sure that the display is turned on – it has
its own power button.
Make sure that your power cord is plugged into a
grounded three-prong outlet. Check to see
whether the outlet works by plugging another
item (such as a lamp) into the outlet. (If the light
on the front of the display is lit, it is getting
power. Try the next item on this list.)
Check the cable connection between the display
and the computer. The cable connectors must be
pushed in all the way.
16
Getting Help
Adjust the brightness and contrast controls on
the display. (The information may be there, but
you just can't see it.)

Fax and Phone

I can't dial out.
Check to make sure that a telephone cable connects
from the back of the computer to the wall. The cable
must be plugged into the Line socket on the
computer (see illustration on page 28). The other
socket is there to plug in a phone if you want to.
I can't correct typing mistakes when dialing a
phone number in Intel Connect.
The Backspace key doesn't do anything here. If you
misdial a number, you must hang up and start over.