HP Compaq Presario,Presario 8380 Supplementary Manual page 52

9
Remove the retaining plate and put it aside.
10
If replacing a card, disconnect any cables
attached to the card. Then, holding the card by its
metal bracket and the far top corner of the card,
carefully pull the card straight out of the slot.
Continue with step 15.
Note:
If you're adding a new card in a previously
unused slot, you will need to remove the expansion slot
cover as described in the following steps.
11
Remove any add-in boards that are next to the
expansion slot cover you want to remove.
12
Insert a screwdriver into the opening in the
expansion slot cover (B). Gently rock the
screwdriver up and down until the connecting
tabs at the top edge break.
48
Getting Help
B