Canon i960 Series Quick Start Manual page 61

Printing Maintenance
1
Ensure that the printer is on.
2
Open the BJ Printer Utility BJ Printer Utility BJ Printer Utility dialog box. BJ Printer Utility
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications folder, and then the Utilities Applications
Applications Applications
(2) Double-click the Print Center
(3) Select i960 i960 from the Name
i960 i960
(4) Select i960 i960 i960 from the Product i960
3
Start Print Head Deep Cleaning.
(3) When the confirmation message is displayed, click OK
Print head deep cleaning starts when the POWER
perform any other operation until the print head deep cleaning is completed.
This takes about one minute.
Note
56
Print Center icon.
Print Center Print Center
Name list and click Configure
Name Name
Product Product Product list and click Select
After print head deep cleaning finishes, print the nozzle check pattern
to verify that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern"
Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern
If the head is still not clean after the second deep cleaning, the print
head may be worn out, even if ink remains in the ink tanks.
In this event, contact the Customer Care Center.
Utilities folder.
Utilities Utilities
Configure.
Configure Configure
Select. Select Select
(1)
Select Cleaning Cleaning Cleaning from Cleaning
the pull-down menu.
(2)
Click Deep Cleaning Deep Cleaning Deep Cleaning. Deep Cleaning
OK.
OK OK
POWER lamp starts blinking. Do not
POWER POWER
on page 50.