Canon Color imageCLASS MF9220Cdn Starter Manual page 19

–
Make sure the paper stack does not exceed the load limit
mark (A).
–
The optional paper drawer holds approximately 500
sheets of paper (20 lb (75 g/m
10
Press [OK] to proceed to the "Setup Guide. "
11
Hold the optional paper drawer with both
hands and set it back into the machine.
12
Push the paper drawer as far as it will go.
–
For details on loading paper in the stack bypass tray, see
"Introduction of the Machine, " in the e-Manual.
–
If you loaded a size and/or type of paper that is different
from what you registered in the "Setup Guide, " you need
to change the paper settings on the machine. See
"Change the Settings, " on p. 37.
)).
2
1 Settings Necessary to Use the Machines Functions
13
Press [OK] to proceed to the "Setup Guide. "
14
Make sure the following screen is displayed
on the display, then press [OK] to proceed to
the "Setup Guide. "
15
Use [ ▼ ], [ ▲ ] or
paper size you loaded, then press [OK].
If you use inch size paper, press the left Any key to select
<A/B Sizes> and the paper size you want to use.
16
Use [ ▼ ], [ ▲ ] or
paper type you loaded, then press [OK].
(Scroll Wheel) to select the
(Scroll Wheel) to select the
17