Firmware Upgrading; Download Firmware - Kiloview RE-1 V2 Quick Start Manual

Introduction
⚫
If the platform RTMP streaming address and live broadcast code are separate, please use "/" to add the live broadcast
code after the RTMP address. The format is: rtmp address/live code.
⚫
Please make sure the device is connected to the network, and configure the correct IP address, DNS and other
parameters.

8 Firmware Upgrading

8.1 Download firmware

Kiloview will provide the firmware of updating functions for RE-1 V2, please visit.
https://www.Kiloview.com/en/support/download/
Select " Rack-mounted Codec " > "RE-1 V2", find and download the latest firmware.
8
Page