Makita DUR194RTX2 Instruction Manual page 11

ASSEMBLY
WARNING:
Always be sure that the tool is
switched off and battery cartridge is removed
before carrying out any work on the tool. Failure to
switch off and remove the battery cartridge may result
in serious personal injury from accidental start-up.
WARNING:
Never start the tool unless it is completely
assembled. Operation of the tool in a partially assembled state
may result in serious personal injury from accidental start-up.
Attaching the barrier
Attach the barrier to the loop handle using the screw on the barrier.
Fig.5
► 1 . Barrier 2. Screw
CAUTION:
After assembling the barrier, do not
remove it. The barrier works as a safety part to prevent
you from contacting the cutting blade accidentally.
Installing the protector
WARNING:
Never use the tool without the
guard illustrated in place. Failure to do so can
cause serious personal injury.
CAUTION:
Take care not to injure yourself on
the cutter for cutting the nylon cord.
Attach the protector to the clamp using bolts.
1
2
3
Fig.6
► 1 . Clamp 2. Bolt 3. Protector
1
2
After installing the protector, remove the cutter cover
from the cutter.
Fig.7
► 1 . Cutter 2. Cutter cover
Before installing the cutting tool, remove the nut, cup,
and clamp washer from the spindle by turning the nut
clockwise using the box wrench while holding down the
spindle lock button.
1
2
3
4
5
Fig.8
► 1 . Nut 2. Cup 3. Clamp washer 4. Spindle 5. Spindle
lock button
Installing the cutting tool
NOTE: The type of the cutting tool(s) supplied as
the standard accessory varies depending on the
countries. The cutting tool is not included in some
countries.
NOTE: Turn the tool upside down so that you can
replace the cutting tool easily.
11 ENGLISH
1
2