Selecting The Film Type; Film Type Setting - Canon CanoScan FS4000US User Manual

Selecting the Film Type

Select the appropriate film type (color/monochrome, negative/positive) for the film being scanned.

Film Type Setting

Click the arrow button on the right side of the
the desired film type from the pull-down menu.
• The film type setting is grayed out and not available when a film holder is not inserted or when an IX240 film
cartridge holder that does not contain a cartridge is inserted.
• The following film types are selected when a film holder is first inserted.
35 mm film strip holder: Color Negatives
Slide mount holder: Color Positives
When using an IX240 film cartridge holder, the loaded film type is automatically identified and the appropriate
film type is selected.
However, if the same film holder is loaded again, the previously set film type will be selected.
• FilmGet FS can be used to scan sleeve, mount and cartridge film formats. For more information on film formats,
please refer to "2. Film Basics" of "Chapter 5 Setting the Film in Position" in Getting Started.
Sleeve
(Film Type) box in the main window, and select
Mount
FilmGet FS User's Guide
Scanning
Cartridge
(IX240 film)
33
1
2
3
4
5