Making Copies - Canon imageCLASS MF5550 Basic Manual

Making Copies

Follow this procedure to make copies:
1
Place the document on the platen glass or load it in the ADF.
For details on how to place or load documents, see "Setting Up Documents," on p. 3-3.
2
Press [COPY].
3
Use the numeric keys to enter the number of copies.
5
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
5
Press [Start].
NOTE
To cancel copying, press [Stop/Reset].
5-2 Making Copies
Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image
Quality (Resolution)," on p. 5-8.)
Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure
(Density)," on p. 5-9.)
Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"
on p. 5-6.)