ECS 915GV-M10 Manual page 9

Table of Contents

Advertisement

Memory
Supports DDR2 533/400 MHz DDR SDRAM DIMMs
Accommodates two unbuffered DIMMs
Up to 1 GB per DIMM with maximum memory size up to 2 GB
Expansion Slots
One PCI Express Lite slot for Graphic Interface
one PCI Express x1 slot
Two 32-bit PCI v2.3 compliant slots
One 40-pin IDE low profile connector that supports two IDE devices
One floppy disk drive connector
Four 7-piin SATA connectors
Onboard IDE channels
One IDE Channel supporting ATA-66, ATA-100
Supports PIO (Programmable Input/Output) and DMA (Direct Memory Access)
modes
Supports IDE Ultra DMA bus mastering with transfer rates of 100/66/33 MB/
sec
Serial ATA
Four Serial ATA Connectors
Transfer rate exceeding best ATA (~150 MB/s) with scalability to higher rates
Low pin count for both host and devices
AC'97 Audio Codec
Compliant with AC'97 2.3 specifications
Meets performance requirements for audio on PC99/2001 systems
Meets Microsoft WHQL/WLP 2.0 audio requirements
HRTF 3D Positional Audio and 10 Bands of Software EQualizer
Onboard I/O Ports
Two PS/2 ports for mouse and keyboard
One serial port
One parallel port
One VGA port
One LAN port (optional)
Four back-panel USB2.0 ports
Three Audio jacks for microphone, line-in and line-out
Fast Ethernet LAN (optional)
Integrates Fast Ethernet MAC, physical chip, and transceiver onto a single
chip
Supports 100Mbps and 10Mbps operation/N-Way Auto negotiation
Complies with PC99/PC2001 standards and supports ACPI power manage-
ment
Supports Full Duplex Flow Control (IEEE 802.3x)
Introducing the Motherboard
3

Advertisement

Table of Contents
loading

Table of Contents