ECS 915GV-M10 Manual page 38

32
ACPI Aware O/S (Yes)
This itme supports ACPI (Advanced Configuraion and Power Management Interface). Use
this item to enable or disable the ACPI feature.
Power Management (Enabled)
Use this item to enable or disable a power management scheme. If you enable power
management, you can use this item below to set the power management operation. Both
APM and ACPI are supported.
Suspend Mode (S1 (POS))
Use this item to define how your system suspends. In the default, S1(POS), the suspend
mode is equivalent to a software power down. If you select S3 (STR), the suspend mode is a
suspend to RAM, i.e., the system shuts down with the exception of a refresh current to the
system memory.
Suspend Time Out (Disabled)
This item sets up the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend mode.
LAN/Ring Power On (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem/Ring, or traffic on the
network adapter. You must use an ATX power supply in order to use this feature.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume at a fixed time based on the system's RTC (realtime clock). Use
the items below this one to set the date and time of the wake-up alarm. You must use an ATX
power supply in order to use this feature.
Resume From USB Device (Enabled)
If you enable this item, the system can automatically resume by using the USB device.
Keyboard Power On (Disabled)
If you enable this item, the system can automatically resume by pressing any keys, power
key, or typing in the password on the keyboard. You must use an ATX power supply in order
to use this feature.
Password (Press Enter)
When Keyboard Power On is set to "Password", this item is available and users can enter the
password.
Press <Esc> to return to the main menu setting page.
Using BIOS