Door Alarm And Volume Adjustment Of The Operation Sound; Eco " Operation Indicator Lamp - Hitachi R-S42EMS How To Use Manual

Door Alarm and volume adjustment of the operation sound

You can set the sound level of the alarm louder or no alarm sound.
1
Press down " Powerful " button for
3 seconds or more until the preset
sound is heard.
The volume level is changed from " Standard " to " Louder " or " Sound off " .
Repeat the change of settings to set the operation sound you like (see the table
shown below). The sound is set to " Standard " before shipping.
Preset
Preset sound

" eco " Operation indicator lamp

When the refrigerator is operated in a manner to reduce power
consumption, such as Frost Recycle Cooling, the indicator lamp is
automatically lit to indicate that the refrigerator is operating in the energy
saving mode.
If [ " eco " Operation indicator lamp] isn ' t illuminated, check the
Notice
following things.
・ Immediately after it is installed, plentiful foods are stored at a time or the door is
opened / closed frequently
・ If the door is not closed completely because any food/bag is wedged between the
door and the body of the refrigerator.
・ " Freezer " , " Fridge " or " Quick " is set.
・ The ambient temperature of the refrigerator is about 35˚C or higher.
BB0040171U_R-S42EMSH_C.indd 49
Sound off
Standard
2 beeps Long beep
Notice
● It is impossible to adjust the volume level of
either door alarm or operation sound only.
● When the Door Alarm is disabled, characters
on the Control Panel no longer blink and
operation sound is no longer made, but alarm
indicating " Ice Maker Cleaning " does sound.
● When connecting/disconnecting the power
plug or after recovering from electric power
failure, it will return to the standard setting
where the Door Alarm sounds.
"eco" Operation indicator lamp
49
15.6.18 11:07:51 AM