Auto Exposure Bracketing (Aeb Mode) - Canon PowerShot SX1 IS User Manual

138

Auto Exposure Bracketing (AEB Mode)

In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 110). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
1
Select AEB.
1. Press the
2. Use the
select
button to select
3. Press the DISP. button.
2
Adjust the
compensation range.
1. Adjust the compensation
range with the
button.
2. Press the
• The compensation range can
be set as wide as 2 levels
lower and 2 levels higher than the standard exposure value (the
compensated exposure value if exposure adjustment was
performed) at the center point in 1/3 increments. If exposure
adjustment (p. 136) is already done, setting can be done with
the adjusted value as the center point.
To Cancel the AEB Mode:
Select in Step 1.
The AEB mode is not available when shooting with the flash
on. Only one standard exposure image will be recorded.
Available Shooting Modes
button.
or button to
and use the or
.
or
button.
p. 300
Standard exposure
Compensation range