Using The Flash - Canon PowerShot SX1 IS User Manual

72

Using the Flash

1
Raise the flash
manually.
2
Press the
1. Use the
change the flash mode.
: [Auto]
: [On]
• You can configure detailed settings for the flash when you press
the MENU button while this screen is displayed (p. 112).
3
When you are not using
the flash, lower the
flash until it closes.
• (flash off) appears in the
LCD monitor (or the
viewfinder).
You are recommended to shoot with the camera attached to a
tripod or other device if the camera shake warning icon
appears.
The time required for flash recharging will change depending
on usage conditions and remaining battery power.
A blinking red
indicates insufficient light level. In this case, raise the flash
before shooting. However, when shooting with the
or
button.
or button to
in the LCD monitor (or the viewfinder)
mode there is no indication.
Available Shooting Modes p. 300
,