Advertisement
SC-F3000 Series
1.5 Unpacking and Install
IMPORTANT: Carrier must take photos of all four sides
and top of the box as it is being offloaded from the truck. If
you notice damage to the box or pallet, please take close-up
photos. If photos are not provided, Carrier may be liable for
damages.
Please email photos to
the subject line being the printer serial number. See page 15
for serial number location and additional instructions.
1.
Remove the packing of carton box using the cutter.
Figure 1-20. Removing the packing material
UNPACKING
EpsonSiteSurvey@ea.epson.com
Packing
(Plastic wrap)
2. Release the two PP bands.
with
PP bands
3.
Remove the 12 joints.
[How to remove the joints]
Insert your finger into the hole and remove the joint
while lifting and pulling it.
Note: Requires 4 delivery people and 1 forklift operator (total of 5).
Unpacking and Install
Figure 1-21. Releasing the PP bands
6
Confidential 2
Advertisement
