Cleaning And Maintenance - Silvercrest SSVS 1000 B2 Operating Instructions And Safety Instructions

Cleaning and maintenance

DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from the mains
power socket! Otherwise there is the risk of electric shock!
► Never open any parts of the housing . There are no serviceable parts
whatsoever inside . When the housing is open, there is the risk of receiving
a potentially fatal electrical shock .
WARNING – RISK OF BURNS!
► Allow the appliance to cool down to room temperature before cleaning it .
Otherwise, there is a risk of burns!
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive or caustic cleaning agents . These can attack the
surface and damage the appliance beyond repair .
♦
Clean all exterior surfaces and the mains cable
ened cloth after every use . Always dry the appliance properly before using
it again . Ensure that there is no detergent residue on or in the appliance
before using it again .
♦
In the case of heavier soiling, put the appliance into a suitable pot, bearing
in mind the information found in Section Preparing the appliance, fill
the pot with water and measure the quantity used . The water level must be
on the "Max" marking .
♦
Program an operating process with 65°C and a time of 10 minutes once
the target temperature is reached .
♦
For every 4 litres of used water, add 1/2 table spoon of non-foaming liquid
dishwashing detergent into the water .
♦
Start the operating process . After it has ended, disconnect the plug and
allow the appliance to cool down . As the last step, rinse the appliance
under cold running water . Before stowing it away, thoroughly dry off the
appliance .
SSVS 1000 B2
Never immerse the appliance completely in water or other liquids!
There is a risk of electric shock!
with a slightly damp-
GB │ IE │ NI │ CY
│
13 ■