Setting The Aperture - Canon PowerShot G10 User Manual

98

Setting the Aperture

The aperture adjusts the amount of light entering through the lens.
When you set the aperture value, the camera automatically selects a
shutter speed to match the brightness.
Selecting a lower aperture value (opening the aperture) allows you to
blur the background and create a beautiful portrait.
A higher aperture value (closing the aperture) brings the entire range
from foreground to background into focus. The larger the aperture
value, the greater the range of the image brought into clear focus.
1
Set the mode dial to
2
Configure the aperture
setting.
1. Use the control dial to change the
aperture value.
• When using the control dial, the
bar will be displayed and the aperture
value can be changed.
3
Shoot.
• If the shutter speed is shown in red when the shutter button is
pressed halfway, the image is underexposed (insufficient light)
or overexposed (too much light). Use the control dial to adjust
the aperture value until the shutter speed shows in white (you
can also use the Safety Shift (p. 97)).
Available Shooting Modes
.
p. 300
bar
Aperture value