Customizing Display Information - Canon PowerShot G10 User Manual

66

Customizing Display Information

You can select which LCD monitor display modes are enabled when
the DISP. button is pressed, as well as select which of the following
information is displayed in each mode.
LCD/Viewfinder
( / / )
Shooting Info
Grid Lines
3:2 Guide
Histogram
1
Select [Custom Display].
1. Press the MENU button.
2. In the
button to select [Custom Display].
3. Press the
Available Shooting Modes
Select whether to enable or disable each of the display
modes for the LCD (Display 1/Display 2/No display).
The display switches between each enabled display
mode with each press of the DISP. button (p. 63). A
display mode that is disabled will not appear when you
press the DISP. button.
Displays shooting information (p. 49).
Displays grid lines to divide the screen into 9 parts.
Helps confirm the vertical and horizontal positioning of
the subject (p. 49).
Helps confirm the print area for a 3:2 print*. Areas
outside the printable area are grayed out (p. 49).
* Images are still recorded at the standard aspect ratio of 4:3.
Shooting Mode:
Displays histogram (pp. 49, 52).
menu, use the
button.
/ / /
or
p. 300