Locking The Flash Exposure Setting (Fe Lock) - Canon PowerShot G10 User Manual

136
Locking the Flash Exposure Setting
(FE Lock)
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
1
Turn on the LCD monitor.
2
Press the
• If you are using an externally mounted flash, please refer to its
manual for setting instructions.
3
Aim the camera at the subject on which you
wish to lock the exposure.
4
Press and hold the shutter button halfway and
press the
• The flash will pre-fire and the exposure setting will be locked.
• will display in the LCD monitor.
5
Re-aim the camera to compose the shot as
desired and shoot.
To Release the FE Lock:
Operate a button other than the
The FE lock cannot be used when [Flash Mode] in the [Flash
Control] menu is set to [Manual].
Available Shooting Modes
button and select
button.
button or the control dial.
p. 300
(flash on).