Checking For Focus Right After Shooting - Canon Digital IXUS 75 Advanced User's Manual

Checking for Focus Right After Shooting

You can check whether the image is in focus right after it is recorded.
1
Shoot.
The recorded image displays for about 2 seconds (or the
interval set with the Review function
2
Press
image is displayed.
The number of times the DISP. but-
ton is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISP. button
repeatedly until the screen at the
right appears.
Displays as follows.
- Camera is focused: the AF frames are displayed in the
recorded image in white and the frame that is in focus has
an orange frame within it.
- Camera is not focused: an orange frame appears at the
centre of the recorded image.
- Contents of the orange frame can be confirmed at the bot-
tom right, you can change the display magnification of the
area within the orange frame with the zoom lever.
You can switch between orange frames and change the dis-
play position
SET button.
To Cancel Checking the Focus
Press the shutter button halfway.
You can delete an image by pressing the
the image is displayed, except in the display position
change mode (See Basic Guide, p. 20).
Pressing the DISP. button will change the display on the
LCD monitor as follows.
Focus Confirmation
70
(or ) while the
(p. 71) using the MENU button or the FUNC./
Detailed
p. 24).
Recorded Image
Orange frame contents
button while
No Information