Bertini HILTON DA1901B5-GR Instruction Manual page 10

HILTON HEAD 5 IN 1 CONVERTIBLE CRIB
DA1901B5-GR / DA1901B5-G / DA1901B5-W
WARNINGS:
* ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES
(15CM).
* The toddler bed or day bed is not intended for children under 15 months of age or over
50 lbs (22.7 kgs).
TODDLER BED & DAY BED ASSEMBLY: STARTING FROM CRIB
STEP 1: Detach the front panel (D) from the side panels (B & C) with Allen Key (3).
STEP 2: If mattress support (F) is not in the lowest position, unscrew bolts (1) from left & right
side panels (B & C) and move to the lowest position.
STEP 3: Attach bottom rail (E) to side panels (B & C) using wood dowel (6). bolts (1) and
spring washers (5). Use Allen Key (3) to tighten all bolts.
STEP 4: Ensure all bolts are tightly secured.
TODDLER BED & DAY BED ASSEMBLY: STARTING FROM SCRATCH
STEP 1: Follow steps 1 to 2 of the crib assembly instruction.
STEP 2: Follow steps 2 to 3 for the day bed assembly instruction located above (starting from crib).
E
5
3
6
6
C
1
B
A
5
1