Table of Contents
Advertisement
Settings
Settings
<Time Format>
Select the time display format—either [12-Hour]
(Initial) or [24-Hour].
<Time Zone>
Select the time zone for your residential area. For
details, see page 5.
<Clock Adjust>
Adjust the date and clock manually. For details, see
page 5.
<Daylight Saving Time>
(Not used when the clock is set manually)
Activate this by selecting the additional time for
Daylight Saving Time (if available in your residential
area). For details, see page 5.
<Connections SETUP>
Specify or confirm the connected devices information.
<Device List>
Shows the list of the connected (registered) devices.
For details, see page 8.
<PIN Code>
Shows the current PIN code for this unit.
<Device Name>
Shows the device name of this unit— KW-M788BH or
KW-M780BT.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Touch and hold [Enter] to reset all settings you
have made for using Bluetooth mobile phones and
Bluetooth audio players.
<TEL SETUP>
Configure settings for using Bluetooth mobile phones.
For details, see page 40.
<Device Audio Control>
Adjust the device sounds. For details, see page 11.
<Driving Position>
Set your driver's seat potion of your car – [LEFT] (initial)
or [RIGHT].
• This setting changes the sidebar/button position
of Apple CarPlay/Android Auto screens accordingly
with the driver seat position.
<Android Mode Select>
Select your Android usage — either [Android Auto]
(initial) or [Mirroring for Android].)
• This setting is available only when AV source is
turned off with no device connected via USB.
<Beep>
This setting is available only when 2-way speaker
system is selected (page 43).
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
<Maestro Setup>
Get information, and change the settings for using the
ADS adapter.
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings.
• After initializing the settings, adjust the settings on
the <Initial Settings> screen.
<Serial Number>
Displays the serial number.
ENGLISH
51
Advertisement
Table of Contents
