Table of Contents
Advertisement
Settings
Settings
<Sound Effect>
Adjust the sound effect.
<Loudness>
Adjusts loudness.
• OFF (Initial)/Low/High
<Bass Boost>
Selects the bass boost level.
• OFF (Initial)/Level 1/Level 2/Level 3
<Volume Link EQ>
Reduces the driving noise by raising the bandwidth.
• OFF (Initial)/ON
<Space Enhancement>
Virtually enhances the sound space using the Digital
Signal Processor (DSP) system (except for analog
broadcast stations). Select the enhance level.
• OFF (Initial)/Small/Medium/Large
<Digital Track Expander>
Compensates the sound lost while audio compression
process (except for analog broadcast stations).
• OFF/ON (Initial)
<Sound Response>
Virtually makes the sound more realistic using the
Digital Signal Processor (DSP) system. Select the sound
level.
• OFF (Initial)/Level 1/Level 2/Level 3
<Sound Lift>
Moves the center of the sound to the lower or higher
point. Select the height.
• OFF (Initial)/Low/Middle/High
<Fader/Balance>
J
K
H
I
Touch [
]/[
]/[
]/[
] or drag the
<Fader>
When <X'over Network> is set to [2 way], you can
adjust the front and rear speaker output balance.
• F15 to R15 (Initial: 0)
<Balance>
Adjusts the left and right speaker output balance.
• L15 to R15 (Initial: 0)
To clear the adjustment: Touch [Center].
<Speaker/X'over>
Preparation:
Before making the adjustment for <Speaker/X'over>,
select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
mark to adjust.
1
Turn off the AV source.
From the Home screen (page 3), touch as
follows:
2
Display the <X'over Network> screen.
• Press the Volume – button on the monitor panel
and touch the upper right portion on the touch
panel at the same time:
3
Select the crossover network mode.
[2 way]
[3 way]
A confirmation message appears. Touch [Yes].
Select this when 2-way system
speakers are used (front/rear).
Select this when 3-way system
speakers are used (tweeter/mid
range/woofer).
ENGLISH
43
Advertisement
Table of Contents
