JVC KW-M788BH Instruction Manual page 46

Monitor with receiver
Hide thumbs Also See for KW-M788BH:
Table of Contents

Advertisement

Settings
Settings
Now, you can adjust the <Speaker/X'over>
settings.
1
Display the <Settings>
<Speaker/X'over> screens (page
2
Select a car type (
1
), select the location
of the speakers (
2
)*, and then display the
<Speaker Select> screen (
Car Setting
OFF
OFF
Front
Door
* <Speaker Location> is available only when <X'over
Network> is set to [2 way].
<Speaker Location> for rear speakers is only available when
the rear speakers are selected for <Speaker Select>.
44
ENGLISH
3
Select the speaker type (
size of the selected speaker (
<Audio>
display the <X'over> screen (
 42).
Speaker Select
3
).
• If a speaker is not connected, select [None].
• When setting the front speakers, select the
speaker size for <Tweeter>.
4
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
X'over
Front
TW Gain
Gain
HPF FREQ
Slope
Eg. when adjusting <X'over> for front speakers
1
), select the
2
), and then
3
).
6 1/2 inch
[dB]
0dB
8dB
30Hz
-24dB/Oct
[Hz]
<Gain>/<TW Gain>
Adjusts the output volume of respective speaker.
<HPF FREQ>/<LPF FREQ>
Adjusts the crossover frequency for respective
speaker.
<Slope>
Adjusts the crossover slope for respective speaker.
<Phase>
Select the phase for the speaker.
<Time Alignment>
This setting improves the sound field for the seats you
select.
<Position>
You can select either <Listening Position> or <Front
Focus> on the screen. You cannot use both setting at
the same time.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-m780bt

Table of Contents