Channel Scanning - Motorola T6410 User Manual

Channel Scanning

By using
transmissions and lock in on the one that interests you.You don't
have to set a new channel or code, the radio just resets itself
temporarily to that channel and code and you can start talking.
However, if no transmissions take place for five seconds, scanning
resumes.
After you turn on , your radio scans channels and codes until it finds an active
SCAN
one and locks on to it. If you do not begin talking or no one else transmits within a
short time, it will resume scanning.
If you want to scan channel frequencies without interference eliminator codes,
change your code to .
0
Turning on Channel Scanning
To set channel scanning, select the
Your channel/code screen displays hand scrolls through channels when scanning is
turned on.
28
, you can monitor channels and codes for
SCAN
mode and the
TWO WAY
menu.
SET SCAN