Loading Paper In The Multipurpose Tray - Kyocera ECOSYS P2335dn Operation Manual

Operation on the Machine > Loading Paper in the Multipurpose Tray

Loading Paper in the Multipurpose Tray

For details of the supported paper sizes, refer to the following:
Choosing the Appropriate Paper (page 7-6)
For the paper type setting, refer to the following:
Media type (page 4-18)
Be sure to use the multipurpose tray when you print on any special paper.
IMPORTANT
• If you are using a paper weight of 106 g/m
paper you are using.
• Remove each transparency from the top tray as it is printed. Leaving transparencies in the top tray may
cause a paper jam.
The capacity of the multipurpose tray is as follows.
2
• Plain paper (80 g/m
• Thick paper (209 g/m
• Thick paper (157 g/m
• Thick paper (104.7 g/m
• Hagaki (Cardstock): 15 sheets
• Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2:
5 sheets
• OHP film: 1 sheet
• Coated: 30 sheets
NOTE
• When you load custom size paper, enter the paper size by referring to the following:
Configuration Tool Settings Screen (page 4-17)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
Media type (page 4-18)
1
), recycled paper or color paper: 100 sheets
2
): 5 sheets
2
): 5 sheets
2
): 70 sheets
Open the multipurpose tray.
2
or more, set the media type to Thick and set the weight of the
5-2