Table of Contents
Advertisement
Refitting the upper door
Place upper door onto middle
hinge pin and guide the upper
opening of the door on the hinge side
on to the door hinge.
Use your fingers to insert bolt into
the door bearing bush.
Screw in bolt (by approx. ¼ turn)
until it clicks into position.
Fit safety cover on to bolt .
The appliance door is not secure
until safety cover has been
correctly fitted.
Fitting the upper covers
Push on cover until it clicks into
position.
Fit cover on the door hinge.
Push panel on from the side until it
clicks into position.
1
Push on outer cover .
Close the upper door.
Installation
97
Advertisement
Table of Contents
