Table of Contents
Advertisement
Installation
Replace spring clip (keeper) on the
opposite side:
Press the lug downwards and push
spring clip to the side out of the
guide.
Push spring clip into the guide on
the opposite side until it clicks into
place.
Remove the bearing bush from the
opposite side.
Tip: Keep the bearing bush in case you
want to change over the door hinging
again at a later date.
96
Refitting the lower door
Place door onto hinge pin from
above.
Close appliance door .
Insert middle hinge pin through
middle hinge plate into the bearing
bush.
Important. The lug on the hinge pin
must point backwards again and must
be guided into the groove on the hinge
plate.
Advertisement
Table of Contents
