Installation
Now remove door opening aid .
Refit opening aid on the opposite
side.
Ensure when inserting door opening
slider , that the plastic on the slider
is not up against the door seal.
This would damage the door seal.
The flush side of door opening
slider must point towards the door
seal.
94
Push door opening slider through
the slot until it clicks into position.
Secure the door opening aid using
the screw with the plastic collar
and the screw without a plastic
collar . Do not tighten the screws.
Tip: Check whether the opening aid
moves easily by pressing it. If it does
not, you will need to loosen the screws
slightly.
Fit covers and .