Table of Contents
Advertisement
Message
lights up red in
the display and a
fault code F with
numbers may ap-
pear. An alarm
will also sound.
Cause and remedy
There is a fault.
Tap on the display to switch the alarm off.
Call the Miele Customer Service Department.
To report the fault, you need the fault code and also
the model number and serial number of your
refrigeration appliance. You can access this
information on the display.
To do this, touch on the display.
The appliance data required will be shown on the
display.
Confirm with OK to exit the information display and
the fault code will be shown again on the display.
The refrigeration appliance can be switched off
directly from the fault message display.
There is an appliance fault: this display always has
priority over any settings which have just been
selected.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
Problem solving guide
75
Advertisement
Table of Contents
